Body Lift refers to lifting your body from the chassis by using body blocks. This is very different from Suspension elevators, although they are often used in combination with each other. Suspension lifts involve mounting larger springs and shock absorbers that lift the chassis and body upward.
Body lifts are sold and only lift the body. The height of the elevator ranges from height, but the most common is only two inches. Lifting the body is often done in conjunction with suspension lifts to limit sideways movements. Get to know more about body lift cost via reading online.
To do one of these lifts to your vehicle, you only need to remove the bolts that hold the body to the chassis (usually around 10-16), get a longer bolt and the correct body block and insert it. Body blocks are usually made of hard plastic or aluminum.
You can buy a body lift kit that has everything you need for a particular vehicle, and installing an elevator is not too difficult. With a forklift or several people, you can easily take every corner and insert the beam.
After you do this, you need to check the brake lane, steering shaft and radiator, rod work, gearbox and anything else that might be affected. Often the brake line and hose need to be made longer, and you have to lift the stem with the same amount. If not, the bar will sit lower than your body and will look a little unusual! Make sure you check what's legal in your area; not worth modifying your car is illegal because your insurance will not protect you.